of 6

Material Safety Data Sheet (MSDS) Revision Number:1.0 Last updated Dec 20, PDF

Page 1 of 1 Material Safety Data Sheet (MSDS) Revision Number:1.0 Last updated Dec 20, Product and Company Identification Product Name: 5(6)-ROX,SE; 5 - (and - 6) - Carboxy - X - rhodamine, succinimidyl
3 views6 pages
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Page 1 of 1 Material Safety Data Sheet (MSDS) Revision Number:1.0 Last updated Dec 20, Product and Company Identification Product Name: 5(6)-ROX,SE; 5 - (and - 6) - Carboxy - X - rhodamine, succinimidyl ester; 5(6) - ROX, NHS ester Manufacturer/Supplier: AnaSpec, Inc Campus Drive Fremont, CA Tel: Fax: Catalog Number Unit Size 25mg 2. Hazards Identification Emergency Overview: We do recommend handling all chemicals with caution. Use proper protective equipment when handling chemicals. GHS Hazard Classification: GHS Physical Hazards Skin irritation category 2; Eye irritation category 2 GHS Health and Environmental Hazards: Specific target organ toxicity- single exposure 3 GHS Signal Words: Warning GHS Hazard Statements: H315 Causes skin irritation H319 Causes serious eye irritation H335 May cause respiratory irritation 3, Maybe harmful if swallowed or in contact with skin. GHS Precautionary Statements: P261 Avoid breathing dust/fume/gas/ mist/vapor/spray P305+P351+P338: IF IN THE EYE; rinse cautiously with copious amounts of Water. Potential Health Effects for: Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Good hygiene practice requires that exposure is avoided and that suitable control measures be used in an occupational setting. Ingestion: If swallowed, wash out mouth with water provided person is conscious. Call a physician. Page 2 of 2 Skin: In case of contact, immediately wash skin with soap and copious amount of water. Eyes: In case of contact, immediately flush eyes with copious amounts of water for at least 15 minutes. Chronic Exposures: No information available. We recommend limiting prolonged exposure. Target Organs: Single exposure category 3 3. Composition Ingredients/Components: Chemical Name: 5(6)-ROX,SE; 5-(and-6)-Carboxy - X - rhodamine, succinimidyl ester; 5(6) - ROX, NHS ester Molecular formula: C 37 H 33 N 3 O 7 Molecular weight: CAS-No EC-No 4. First Aid Measures Inhalation: If dust is inhaled, remove from contaminated area. Encourage patient to blow nose to ensure clear passage of breathing. If irritation or discomfort persists seek medical attention. Ingestion: If swallowed do NOT induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration. Observe the patient carefully. Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink. Seek medical advice. Skin: If skin or hair contact occurs: Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation. Eyes: If this product comes in contact with the eyes: Page 3 of 3 Wash out immediately with fresh running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. If pain persists or recurs seek medical attention. 5. Fire Fighting Measures Extinguishing media: Special firefighting procedures: Unusual fire and explosions hazards: Water spray or fog. Alcohol resistant foam. Dry chemical powder. BCF (where regulations permit). Carbon dioxide Alert Emergency Responders and tell them location and nature of hazard. Wear breathing apparatus plus protective gloves. Prevent, by any means available, spillage from entering drains or water course. Use water delivered as a fine spray to control fire and cool adjacent area. DO NOT approach containers suspected to be hot. Cool fire exposed containers with water spray from a protected location. If safe to do so, remove containers from path of fire. Equipment should be thoroughly decontaminated after use. Emits toxic fumes under fire conditions 6. Accidental Release Measures Spill response Containment Remove all ignition sources. Clean up all spills immediately. Avoid contact with skin and eyes. Control personal contact by using protective equipment. Use dry clean up procedures and avoid generating dust. Place in a suitable, labeled container for waste disposal Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. DO NOT enter confined spaces until atmosphere has been checked. DO NOT allow material to contact humans, exposed food or food utensils. Avoid contact with incompatible materials. When handling, DO NOT eat, drink or smoke. Keep containers securely sealed when not in use. Avoid physical damage to containers. Always wash hands with soap and water after handling. Use good occupational work practice. Empty containers may contain residual dust which has the potential to accumulate following settling. Such dusts may explode in the presence of an appropriate ignition source. Do NOT cut, drill, grind or weld such containers Page 4 of 4 PPE Use personal protective equipment 7. Handling and Storage Store at -20 C desiccated and protected from light. Store away from oxidizing agent. 8. Exposure Controls / Personal Protection Engineering controls PPE Local exhaust ventilation is required where solids are handled as powders or crystals; even when particulates are relatively large, a certain proportion will be powdered by mutual friction. Exhaust ventilation should be designed to prevent accumulation and re-circulation of particulates in the workplace. If in spite of local exhaust an adverse concentration of the substance in air could occur, respiratory protection should be considered. Such protection might consist of: (a): particle dust respirators, if necessary, combined with an absorption cartridge; (b): filter respirators with absorption cartridge or canister of the right type; (c): fresh-air hoods or masks Build-up of electrostatic charge on the dust particle, may be prevented by bonding and grounding. Powder handling equipment such as dust collectors, dryers and mills may require additional protection measures such as explosion venting. Air contaminants generated in the workplace possess varying escape velocities which, in turn, determine the capture velocities of fresh circulating air required to efficiently remove the contaminant. Use personal protective equipment 9. Physical and Chemical Properties Physical State Solid Odour Solubility in Water Slightly water soluble Specific Gravity ph Boiling Point Melting Point Flash Point Vapor Pressure: Vapor Density: 10. Stability and Reactivity Thermal Decomposition Dangerous Products of Decomposition Dangerous Reactions No data available No data available COx, NOx when burned Keep container tightly closed in a dry well-ventilated place. Containers which are opened must be carefully resealed and kept upright. Store in -20 o C refrigerator. 11. Toxicological Information RTECS Number Page 5 of 5 Toxicity Health Hazards Potential Hazards Carcinogenicity: OSHA Permissible Exposure Limit(PEL) Data ACGIH Threshold Limit Values (TLV) Reproductive Toxicity: No information available. Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre-existing organ (e.g. liver, kidney) damage is evident. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern. No significant acute toxicological data identified No information available 12. Ecological Information No information available. 13. Disposal Considerations All waste must be handled in accordance with local, state and federal regulations. Legislation addressing waste disposal requirements may differ by country, state and/ or territory. Each user must refer to laws operating in their area. In some areas, certain wastes must be tracked. 14. Transport Information Hazard Class Identification Number Packing Group Proper Shipping Name (DOT) 15. Regulatory Information California Proposition 65: US TSCA (Toxic Substance Control Act): US CERCLA (Comprehensive Environmental Response, Compensation, and Liability Act: US SARA Title III (Superfund Amendments and Reauthorization Act: US Other: EC EINICS (European Inventory of Existing Commercial Chemical Substances) Number: EC Risk Statements: Other Country Regulations: 16. Other Information It is not intended for food, drug, household, agricultural or cosmetic use. A technically qualified Page 6 of 6 individual experienced in handling potentially hazardous chemicals must supervise its use. The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. Users should make independent decisions regarding completeness of the information based on all sources available. AnaSpec shall not be held liable for any damage resulting from handling or from contact with the above product.
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!